Run the Load

From booked to delivered: see the load on your phone, check in and out at each stop, send BOL and POD photos, and keep dispatch in the loop.

This guide walks one load from the moment it is booked to the moment it is delivered. You do the driving part in the Freigent driver app on your phone. The dispatch side (you, or whoever dispatches for you) watches in the Freigent web app.

Before you start

  • You are signed in to the driver app on your phone.
  • If you are both the owner and the driver, the app opens in the owner view. Tap the truck icon in the top bar to switch to the driver view. Tap it again (it shows an office building) to switch back.
  • Turn on New Load Assignments in Profile > Notifications so your phone buzzes when a load is assigned to you.

1. Get the load on your phone

  1. When a load is assigned to you, you get a push notification. Tap View Load.
  2. Or open the app yourself. On the Dashboard tab (house icon), look under Today's Stops. Each stop is tagged Pickup or Delivery, and the next one says Next up.
  3. Tap a stop. The route sheet opens with the stops for that day.
  4. At the top you see New assignment: acknowledge so dispatch knows you've seen it.
  5. Optional: pick your ETA to the pickup (optional) from the presets, or tap Custom.
  6. Tap Acknowledge. The button changes to Acknowledged with the date and time. Dispatch can now see that you have the load.

Can't run it? Tap Request off this load. Pick a Reason (required), for example Out of hours (HOS exhausted) or Equipment defect, then tap Send request. This is a request, not a decline: the load stays assigned to you until dispatch reassigns it. When dispatch answers, you see Note from dispatch under your request.

2. Drive to the pickup

  1. In the route sheet, tap Navigate to open directions to the stop.
  2. While you are on the way, the sheet shows EN ROUTE TO and the stop name.
  3. Need a break? Tap Pause Trip, pick how long (for example 1 Hour) and why (for example Rest Break). The sheet shows TRIP PAUSED. Tap Resume Trip when you roll again.

3. Check in at the pickup

  1. When you pull in, tap I've Arrived (or Check In on the stop).
  2. The Check In Time box opens. If you actually arrived earlier, type the real time in the note.
  3. Tap Confirm. Your arrival is recorded and the detention clock starts on Freigent's side.

Your phone asks for your location at check-in. If GPS is weak, the check-in still goes through.

If dispatch sent an arrival prompt, you may see You've arrived instead. Tap I'm Here, then follow the screens: Upload your BOL, the Arrived at facility and Left facility times, and Save Times. You finish on All set. Tap Done, or Do this later to come back to it.

4. Upload the BOL and load photos

You must check in before you can upload documents for a stop. At a pickup you need two things before you can check out: the Bill of Lading (BOL) and Load Photos.

  1. On the stop, open Documents & Notes.
  2. Tap Take Photo to shoot the paper, or Choose File to pick one you already have.
  3. Under Document Type *, choose BOL. For freight pictures choose Load Photo.
  4. Add Notes (optional) if something is off (seal number, short count).
  5. Tap Upload Document. You see Document uploaded successfully.

Other types you can pick: POD, Lumber Receipt, Damage Report, Scale, Seal, Photo, Other.

5. Check out and head to delivery

  1. Tap Check Out.
  2. The Check Out Time box says All required documents must be uploaded before checking out. Tap Confirm.
  3. If something is missing, the Required Documents list shows what is Completed: and what is Still needed:. Tap Upload next to the missing item, then try Check Out again.
  4. The stop now shows Stop Completed and the next stop shows EN ROUTE TO.

There is no separate "Loaded" or "In transit" button. Checking out of the pickup is what tells dispatch you are loaded and rolling.

6. Deliver and send the POD

  1. At the receiver, tap I've Arrived or Check In, then Confirm (same as step 3).
  2. After unloading and getting the signed POD, tap Check Out. At the final delivery, the Required Documents list shows Proof of Delivery (POD) under Still needed:.
  3. Tap Upload next to it. The POD Capture screen opens.
  4. Tap Take POD Photo. If you only have a paper copy to shoot, tap Photograph Paper POD. (Paper PODs get a manual review.)
  5. On Review Photo, tap Retake if it is blurry, or Submit.
  6. Enter the Dock / Door Number, or tap Skip.
  7. Wait for Uploading & verifying POD... to finish. If you see Upload Failed, tap Retry.
  8. Tap Check Out again, then Confirm. The load is delivered.

The POD is what gets you paid. See Get Paid.

7. Talk to dispatch

  1. Open the Communication tab (chat bubbles icon).
  2. Under Channels, tap Dispatch. This thread is always there and goes to whoever is on the dispatch desk.
  3. Type in Type a message... and send.
  4. To send a photo, tap the paperclip and choose Camera, Photo Library or Files.
  5. To point at a specific load or stop, use @load or @stop and pick it from Select Reference.

What dispatch sees in the web app meanwhile

  1. Open Records > Loads. Each load shows its stage in the Status column.
  2. Click a load to open its side panel. The Logs tab is the timeline: every entry is tagged Driver, Dispatch, AI, You or System, so you can see check-ins, check-outs and document uploads as they happen.
  3. Driver messages land in Messages.
  4. Anything that needs a decision (an overdue check-in, a missing POD, detention starting) shows up as a task in Workflow. See Your Daily Queue.

When something goes wrong

Stuck at the dock (detention). Your check-in time starts the clock, so always check in when you arrive. On the web side, Freigent opens a Detention Starting task in Workflow. Open it, enter the hours in Detention Hours, tick Broker notified of detention if you told the broker, and click Log Detention.

Running late. The driver app has no running-late button yet. Message Dispatch in the Communication tab with your new ETA. On the web side, Freigent may open a Running Late task in Workflow with a drafted note to the broker for you to approve.

Can't run the load. Use Request off this load (step 1). It does not drop the load; dispatch decides.

Accident.

  1. Go to Profile > SAFETY > Report an Accident.
  2. If anyone needs help, tap Call 911 first.
  3. Tap Message dispatch so they know right away.
  4. Answer Is anyone hurt? and How bad is it?, add anything under Anything dispatch should know? (optional), and tap Send report.
  5. After the report is filed you can add Photos (optional) with Take photo or From library.

AI Assistant

Ask about Freigent docs

Welcome to AI Assistant

Ask me anything about Freigent documentation, Booking Assistant setup, API integration, or platform features.

Install the Booking Assistant extension

Press Enter to send, Shift+Enter for new line