Clicking Records in the sidebar opens a page that lists every record screen by section: AI, Dispatch, Accounting, Safety, Assets and Contacts.
Everything a dispatcher does by hand lives under Dispatch in the sidebar (inside Records):
| Screen | What you use it for |
|---|---|
| Dispatch > Overview | Loads that need assignment, your fleet's status, and this week's numbers. |
| Dispatch > Loads | Every load. Create loads, open one to assign or hand it off, and work the Needs assignment tab. |
| Dispatch > Load Builder | See how full each booked load is and look for loads you could combine. |
| Dispatch > Booking Assistant | The AI that finds and negotiates loads. See Booking Assistant. |
| Dispatch > Asset Tracking | A map and list of your trucks, trailers and drivers. |
The rules for who and what can go on a load (usual trucks, owner-operators, double booking) are in How Driver, Truck and Trailer Assignments Work. What the driver does on the road is in Run the Load.
Create a load
- Go to Dispatch > Loads and click Create New Load.
- Under How would you like to enter load details?, pick one:
- Manual Entry: type it in.
- Rate Confirmation: upload the broker's PDF (Upload Rate Confirmation, or drop it on Drop your PDF here!). Freigent reads the load details and stops, then suggests a driver. It usually takes 10 to 20 seconds. The dialog shows how many rate con scans you have left this month.
- Load Details step: fill in Load Number *, Equipment Type *, Rate * and Weight *. Commodity and Package Count are optional.
- Click Next. Stops step: every stop needs a full address and a time. Choose a Time Type for each stop, and use Add Pickup or Add Delivery for more stops. Tick Appointment Required where it applies.
- Click Next. Assets step: pick the driver, truck and trailer, or leave them empty and assign later. The picker works as described in Assignments.
- Click Create Load.
If a required field is empty, the dialog says Fill in before continuing: and lists what is missing.
Find and filter loads
The Loads page opens on All loads. The numbers at the top are Total Loads, Dispatched, Picked Up, Delivered and Total Revenue for the period you pick.
- Search loads by number... finds a load by its number.
- The date filter is Filter by date the load was created: Last 7 days up to Last 12 months, or a Custom range. It filters by when the load was created in Freigent, not by pickup date.
- Filter by Status and Filter by Trailer Type narrow the list. Clear filters resets them.
- There is no filter by carrier. If you dispatch for other carriers, each carrier's loads live in its own company: pick the carrier in the dropdown at the top of Workflow to work its queue, or switch to its company from the company menu to see its Loads page. See Dispatch for Other Carriers.
- Columns shows or hides columns.
The menu on each row has View Details, Edit Load, Workflow History, View Logs, Rank Drivers and Delete Load.
Loads that need a driver, truck or trailer
Click the Needs assignment tab on the Loads page. It lists loads starting in the next 7 days that have a stop missing a driver, truck or trailer, plus loads whose driver was released. The soonest is at the top.
Each row shows when the load starts (for example Starts in 5 h), what is missing, and why it is on the list:
| Reason | What happened |
|---|---|
| Not assigned yet | Nobody has put a full rig on it. |
| Driver released for approved time off | You approved time off that overlaps the load. |
| Driver taken off the load at their request | You approved the driver's request to come off the load. |
Click Assign on the row to fill the gap. On a paid plan, a row that also has a Workflow task shows a Workflow task link.
Your team is notified when a load lands on this list, again 24 hours before its first stop, and by email 4 hours before. When the list is empty you see Every load in the next 7 days has a driver, truck and trailer.
Work one load
Click a load to open its panel. Across the top:
- Assign: put a driver, truck and trailer on the load. See Assignments.
- Hand off: shown once the load is under way. The stops that are left go to another driver, truck or trailer, and stops already done stay as they are. Pick Start from, then the Driver, Truck or Trailer that takes over (or keep the current one), give a Reason, and optionally Where the handoff happens (optional). Click Hand off.
- Share tracking link: copies a link to a public tracking page for the load (location, timeline, route) that you can send to a broker or shipper. Stop sharing turns the link off.
The tabs:
| Tab | What it shows |
|---|---|
| Details | Load Information (number, trailer type, rate, weight) and each stop's address and Time Window. |
| Drivers | Driver Ranking: click Rank Drivers to score drivers for this load. Each one is marked, for example Recommended or Equip. mismatch. |
| P&L | The load's profit and costs. |
| Workflow | Tasks the AI team opened for this load. |
| Logs | The timeline: check-ins, check-outs, documents and messages, each tagged with who did it. |
Hand off the rest of a load to another driver
When a truck breaks down or a driver cannot finish, open the load and click Hand off (shown once the load is under way). The stops that are left go to the new driver, truck or trailer; stops already done stay as they are.
- Pick Start from: the stop where the new driver, truck or trailer takes over.
- Pick the Driver, Truck or Trailer that takes over, or keep the current one.
- Give a Reason, and optionally Where the handoff happens (optional).
- Click Hand off.
Dispatch overview
Dispatch > Overview answers "what needs me right now".
- Needs attention: if any loads in the next 7 days are missing a driver, truck or trailer, a red banner says how many. Assign them → opens the Needs assignment tab.
- Scoped metrics: Active Loads, Unassigned, Available equipment, Delivered (7d) and Revenue (7d).
- Work previews: larger fleets see a card per truck with its status (Available, In Transit, Loaded, HOS Rest, Inactive), driver, location, hours left to drive and when the ELD last reported. Filter by status with the buttons above the cards. The board refreshes every 60 seconds. Smaller fleets see a Fleet Status summary with the same counts.
- Quick Actions: shortcuts to Loads Table, Load Builder, Booking Assistant and Asset Tracking.
If no ELD data has come in yet, the board says No ELD data yet · HOS unavailable. Hours and locations need a connected ELD; see Integrations.
Give an available truck a load. On an Available truck card, click + Assign Load. The Needs assignment tab on Loads opens with that truck named at the top. Click Assign on a load and the truck and its driver are already filled in; pick the trailer if needed and click Save assignment. A load that already has a driver or truck keeps what it has. After the save the truck is cleared, so the next Assign starts empty.
If your company has drivers confirm their assignments in the driver app, the save does not assign the driver straight away. Your pick goes on the load's Assign Driver task in Workflow, and the truck and trailer you picked stay on the load. Open that task: it already proposes your driver and truck. Click Assign there and the driver gets the request and confirms it in the app.
Correct a driver's availability (a driver shows unavailable but is good to go, or the other way round). On Dispatch > Overview, on that driver's truck card, click Override availability, then Mark available now (8h) or Mark unavailable (12h). Your override holds for that many hours, then Freigent goes back to its own reading. Clear removes it early.
Team trucks show both drivers, with the one driving now listed first.
How loads reach drivers
The How loads reach drivers button at the top of the overview opens the settings for what the AI does when it finds a driver for a load:
| Option | What happens |
|---|---|
| Auto-Assign | The AI assigns the driver without asking you. |
| Suggest First (default) | The AI suggests a match and you confirm before it is assigned. |
| Recommend Only | The AI ranks drivers and you pick and assign. |
The same page holds Fleet type, Home-time policy and Require assignment approval.
Load Builder
Dispatch > Load Builder lists the loads your Booking Assistant booked, with how much of the trailer each one uses (weight against 45,000 lb and pallets against 28). Filter by status, trailer and capacity (Low (<40%), Medium (40-70%), High (>70%)), and by pickup date.
Select two or more loads and click Check fit to see how they would share one truck's weight and pallet space, or click Combination ideas for loads that could share a truck (loads delivering to the same state, or light loads). Both are planning views built from simple rules, not AI, and they never change or merge your loads. Freigent cannot merge loads yet: one driver and truck can only be assigned to loads whose stop times do not overlap. Load Builder needs a paid plan, and it is empty until the Booking Assistant books loads.
Asset Tracking
Dispatch > Asset Tracking shows your trucks, trailers and drivers on a map, with a list beside it.
- Switch between Trucks, Trailers and Drivers, or All.
- Use the Status filter (for example Available, En Route, Assigned to load, Resting, Maintenance, Offline) and Search number, name, driver, location....
- My assignments, My team and All fleet limit the list to what you look after. You set who you look after with Change assignment in an asset's details.
- Click an asset for its details. View load opens the load it is on.
Truck positions come from your ELD and driver positions from the driver app. A position shows when it was last reported.
Messages and email
Messages (sidebar, above Records) is chat for your team and drivers.
- Channels are group conversations for your team. Direct Messages are one-to-one. Use Create Channel or Create Direct Message to start one, and Search channels... to find one.
- Each driver has a thread with your dispatch desk. In the driver app it is called Dispatch; on your side it shows under Direct Messages for the people in your dispatch department. Whoever is on the desk can answer.
- Reported (owners and admins, at the bottom of the chat list) shows only once a driver has reported a message or blocked someone in the driver app. It lists each report and block with the sender, the message, the reason and its status. It never shows who reported. Freigent reviews each one within 24 hours.
- When a driver blocked someone in a thread, owners and admins see a banner there: that person's messages no longer reach the driver, so send instructions as a load update or a call.
- When Freigent removed a message for breaking the terms of use, owners and admins see Freigent removed this message for breaking the terms of use. in its place.
Email (sidebar, under Messages) is your connected mailbox inside Freigent, with Inbox, Sent, Archive and Drafts, Search mail and Compose. When you open an email, Freigent shows what kind of email it is and what it found in it. Add contact saves the sender to your contacts. Re-read has Freigent read the email again. If the AI drafted a reply, you see Draft reply waiting for you; click Open to review to approve, edit or send it from Workflow.
To connect a mailbox, see Connect Your Email. For AI phone calls, see Phone Agent.
Contracts
Dispatch > Contracts is not open to customer accounts yet.