Trucks, Trailers and Drivers

Add a driver, add a truck, add a trailer, invite drivers to the app, import from a spreadsheet or your ELD, and keep maintenance schedules and yard locations in Freigent.

Your drivers, trucks, trailers, maintenance and yards live under Assets in the left sidebar:

Sidebar itemWhat you do there
Assets > DriversAdd, edit and delete drivers, invite them to the driver app, handle their requests
Assets > TrucksAdd, edit and delete trucks, schedule service
Assets > TrailersAdd, edit and delete trailers, schedule inspections
Assets > MaintenancePreventive maintenance schedules, service history and fleet health
Assets > LocationsYards, drop lots and other places you send drivers

Which truck and trailer a driver usually runs, owner-operator rules and double-booking checks are covered in How Driver, Truck and Trailer Assignments Work.

Add a driver

  1. Go to Assets > Drivers.
  2. Click Add Driver. The Add New Driver dialog opens.
  3. Fill in First Name, Last Name and Phone. These three are required.
  4. Optionally fill in the rest: Email, Date of Birth, Language Preference, address, CDL Number, CDL State, CDL Expiry Date, Medical Certificate Expiry, endorsements, Status, Driver Type (Company Driver, Owner Operator or Lease Operator), Hire Date, Pay Type, pay rate, an emergency contact and Notes.
  5. Leave Send mobile app invitation to driver on if you want Freigent to invite the driver to the app right away (see below). It is on by default.
  6. Click Add Driver.

Adding yourself because you drive your own truck? Add yourself here like any driver, and in Email use the same email you sign in to Freigent with: the driver app uses it to match your login to your driver record. Set Driver Type to Owner Operator if you own the truck.

You can also add a driver from the Setup & tours page (open your user menu at the bottom of the sidebar). In the Drivers section, click Add Driver. It opens the same form.

Edit or delete a driver

On Assets > Drivers, open the row menu (the three dots) on a driver:

  • View Details expands the row. The details show contact, licensing (including CDL Expiration and Medical Card Expiration), employment, assignment and pay information, with tabs for Details, Stops, Time off & requests and Scorecard.
  • Edit Driver opens the Edit Driver dialog. Click Update Driver to save.
  • Delete Driver (to remove a driver) marks the driver deleted. Their loads and history stay. Deleted drivers are hidden from the list; click Show deleted to see them again.

Freigent refuses to delete a driver who still has a truck or trailer assigned, or loads on the schedule. The message tells you what to move first: in Edit Driver, pick No truck in Assigned Truck and No trailer in Usual Trailer, and reassign their upcoming loads. Then delete the driver. If you only want the driver off the board, set their status to Inactive in Edit Driver instead of deleting.

Other things on the Drivers page

  • Message Driver (in a driver's details) sends a push notification to the driver's app. It only works once the driver has linked their app account.
  • Add stop (in a driver's details) gives the driver an instruction, such as Drop trailer, Pick up trailer, Stop by yard or Swap truck, at a saved location or a typed address. It goes on their schedule and their app. Turn on Photo required if the driver must take a photo before marking it done.
  • The Requests tab lists time-off and load-off requests drivers send from the app. Click Approve or Reject.
  • The Needs reassignment tab lists loads whose driver was released by an approved request.
  • App settings opens Driver app settings, the company defaults for the driver app: Photo required on instruction stops, Who sees gate codes (Only drivers with a stop there or All drivers), Trailers (Each driver keeps their own or Drivers swap) and Trucks (Each driver keeps their own or Slip seat). Only an owner or admin can change these. A driver's details can override the trailer and truck choice for that driver.

Invite a driver to the mobile app

There are three ways to send a driver the app download link.

When you add the driver

Leave Send mobile app invitation to driver on in Add New Driver. If you entered an email, the invite goes by email. If you did not, it goes by text message, and by saving you confirm the driver agreed to receive one text from Freigent.

From the Drivers page

  1. On Assets > Drivers, click Invite Driver. The Invite Driver to Mobile App dialog opens.
  2. Enter the driver's Phone Number (required, 10 or 11 digits).
  3. Optionally add Email (Optional), Driver Name (Optional) and Personal Message (Optional).
  4. To also text the link, tick Also send SMS notification, then tick the box confirming the driver gave verbal consent to one text from Freigent. Send Invitation stays disabled until you do.
  5. Click Send Invitation.

The email is only sent if you entered an email address. Freigent refuses the invite if another driver in your company already has that phone number.

Several drivers at once

On the Setup & tours page, in the Drivers section, click Invite Drivers. The Invite Drivers to App dialog lists your drivers as Ready, Invited, No Phone or Skipped. You can type a missing phone number in place, select drivers and click Send Invites (after confirming SMS consent), or show a QR Code for a driver to scan in person.

What the driver receives

  • Email: subject "Join (your company) - Download the Freigent Driver App", with an Accept Invitation & Get Started button.
  • Text message: a short link from your company, with "Reply STOP to opt out." Texts go out in small batches, so allow a few minutes.

The link opens a page with your company name and logo and a Get the App button for the driver's phone (on Android during early access the button reads Join and install, and the driver joins before installing from the Play Store). The app is the Freigent Driver app. It is Android only for now, in early access on Google Play, and it is not on iPhone yet: an iPhone that opens the link shows Not on iPhone yet. The link expires after 7 days. Sending a new invite to the same phone number replaces the old link.

For what the driver does after installing, see Driver App.

Add a truck

  1. Go to Assets > Trucks.
  2. Click Add Vehicle. The Add Vehicle dialog opens on the Add Vehicle tab.
  3. Fill in Unit Number, Make and Model. These three are required.
  4. Optionally add VIN, Year, License Plate and Status (Active, In Shop, Out of Service or Inactive). A VIN must be exactly 17 characters and cannot contain the letters I, O or Q.
  5. Click Add Vehicle.

The Setup & tours page also has Add Truck in its Fleet section, which brings you to Assets > Trucks.

Edit or delete a truck

Open the row menu on a truck:

  • View Details shows License Plate, VIN, Fuel Efficiency, Ownership, Last Service, Insurance and inspection dates, plus any open Compliance & Maintenance Alerts for that truck. Click an alert to open its task.
  • Edit Truck opens Edit Vehicle. Click Update Vehicle to save.
  • Schedule Maintenance books a service appointment (see Maintenance).
  • View Maintenance History lists past service for the truck.
  • Delete Truck deletes it after you confirm. Freigent refuses with "Cannot delete truck with active load assignments. Complete or cancel active loads first." while the truck is on an active load.

Add a trailer

  1. Go to Assets > Trailers.
  2. Click Add Trailer. The Add Trailer dialog opens.
  3. Fill in Trailer name / unit #. It is the only required field.
  4. Optionally set Type (Dry Van, Reefer, Flatbed, Step Deck, Lowboy, Tanker, Curtainside or Other), Length (ft), License Plate and VIN.
  5. Click Add Trailer.

Edit or delete a trailer, and its inspection history

Open the row menu on a trailer:

  • Edit Trailer opens the Edit Trailer dialog. Click Update Trailer to save.
  • Schedule Inspection books a service appointment for the trailer.
  • View Inspection History lists the trailer's past inspections and service (its maintenance history).
  • Delete Trailer deletes it after you confirm.

Import from a spreadsheet

The spreadsheet import has its own page for drivers, trucks and trailers. Reach it from the Setup & tours page, or from the Import CSV tab in the Add Vehicle or Add Trailer dialog (click Open CSV import):

  1. Open your user menu at the bottom of the sidebar and click Setup & tours.
  2. In the Fleet section, click Import Trucks or Import Trailers. In the Drivers section, click Import Drivers.
  3. Click Download Template if you want a CSV with the right column headers.
  4. Upload your CSV file (CSV only, up to 10 MB) and click Continue to Mapping.
  5. Match your columns to Freigent's fields and click Continue to Preview.
  6. Check the preview and click Import (the button shows the row count, for example Import 25 Records).

Freigent shows how many records were imported and lists any that failed. Optional columns you map are saved too: for trucks Make/Model, Status, MPG, VIN, Insurance Provider, Insurance Expiration and Last Service Date; for trailers License Plate, Year, Make/Model, Length, Weight Capacity, VIN, insurance and inspection dates.

ImportFields you must map
DriversName, Phone Number, CDL Class
TrucksTruck Name, License Plate, Year
TrailersTrailer Name, Trailer Type

Import trucks and trailers from your ELD

If you have an active ELD connection, the Add Vehicle and Add Trailer dialogs show a third tab, ELD.

  1. Open Add Vehicle (or Add Trailer) and pick the ELD tab.
  2. Click Launch ELD Import. Freigent fetches the list from your ELD.
  3. Units already in Freigent are marked Already added. New ones are selected for you; untick any you do not want.
  4. Click Import (the button shows the count, for example Import 3 Trucks) to add the selected units.

Truck import works with Samsara, Motive and AT ELD. Trailer import works with Samsara. This is a one-time pull: trucks you add later in the ELD do not appear in Freigent until you import again, and there is no ELD import for drivers on the Drivers page. To connect an ELD, see Integrations or click ELD Integration on the Integrations tab.

Maintenance

Assets > Maintenance has three tabs:

TabWhat it shows
PM SchedulesPreventive maintenance schedules per truck or trailer, with Last Done, Next Due and a status of OK, Due Soon or Overdue
Service HistoryEvery logged service, with cost, odometer, vendor and notes
Fleet HealthOne row per truck with ELD data, odometer, fuel and book value

Add a maintenance schedule

  1. Click Add Schedule. The Add PM Schedule dialog opens.
  2. Pick the Asset (a truck or a trailer) and the Service Type.
  3. Set Every (miles), Every (days) or both. At least one is required. With both set, the schedule is due when either is reached.
  4. Optionally fill in Last Service Miles, Last Service Date, Technician Name, Work Order # and Notes.
  5. Click Create Schedule.

If some trucks have no schedule, a chip such as "3 unmonitored" appears at the top. Click it to give those trucks default schedules: Oil Change, Tire Rotation, Brake Inspection, DOT Annual Inspection and Air Filter.

Log a service

  1. Click Log Service.
  2. Pick the Asset and Service Type, and enter the Service Date (required).
  3. Optionally add Odometer (miles), Vendor / Shop, Location, Downtime (hours), Total Cost ($) with parts, labor and outside costs, Work Order #, Receipt / Invoice URL and Notes.
  4. Click Log Service.

On a PM schedule row, Log Service records that the service was done. Use Edit Schedule or Delete on the same menu to change or remove a schedule.

Book a service appointment

Schedule Maintenance on a truck (or Schedule Inspection on a trailer) opens Schedule Maintenance. Pick the Maintenance Type, enter the Scheduled Date and Scheduled Time (all required), and optionally the duration, Estimated Cost, Service Provider and Notes.

Shops & Vendors at the top of the page opens your list of maintenance shops.

Locations

Assets > Locations holds yards, drop lots and the other places your drivers go, with what they need to get in.

  1. Click Add location.
  2. Enter a Name (required) and pick a Kind: Customer facility, Our yard, Drop lot, Partner yard, Shop, Fuel or Other.
  3. Enter the Address. Picking a suggestion fills in the map pin. You can also set Gate latitude and Gate longitude if drivers enter somewhere other than the address.
  4. Optionally add Hours, Check-in method, Phone, Gate code, Parking and row notes, After-hours notes, Lockbox notes and Other notes.
  5. Turn on Default yard if this is your main yard. It is listed first when you add a stop for a driver, and only one location can be the default.
  6. Click Add location.

A location's details show its Stops here. To change one, use Edit location. To retire one, use Archive: it stops showing in pickers and the list, past stops keep pointing at it, and Show archived brings it back into view. Who sees gate codes in the driver app is set in App settings on Assets > Drivers.

Expiry dates and compliance alerts

The driver and truck records store expiry dates (CDL, medical card, insurance, inspections) and show them in the details. The open safety and maintenance tasks for a truck or trailer appear as Compliance Alerts on the Trucks and Trailers pages; click the count to open them in the safety view. How those tasks are created is covered in Safety and Compliance.

AI Assistant

Ask about Freigent docs

Welcome to AI Assistant

Ask me anything about Freigent documentation, Booking Assistant setup, API integration, or platform features.

Install the Booking Assistant extension

Press Enter to send, Shift+Enter for new line