Safety & Compliance

Where to track driver documents, Clearinghouse queries, insurance, training, inspections, incidents and HOS in Freigent, what blocks a dispatch, and which reminders Freigent sends on its own.

Everything safety-related lives in the Safety section of the sidebar. Freigent tracks what you record (documents, queries, inspections, incidents) and what your ELD reports. It cannot see a gap nobody told it about, so a clean screen means "nothing open in what this account has recorded".

Who sees what

ScreenSidebarWho sees it
OverviewSafety > OverviewAnyone with Safety access
ComplianceSafety > ComplianceAnyone with Safety access
InsuranceSafety > InsuranceAnyone with Safety access
Training & CoachingSafety > Training & CoachingSafety access, and the Standard level or higher
InspectionsSafety > InspectionsAnyone with Safety access
IncidentsSafety > IncidentsAnyone with Safety access
HOSSafety > HOSSafety access, and the Standard level or higher
Reports & AuditSafety > Reports & AuditAnyone with Safety access
  • Safety access: owners, admins and members not scoped to a department see the whole Safety section. A team member scoped to a department that does not include safety does not see it: if the Safety menu is missing from your sidebar, that is why. Departments cannot be changed in place yet; the owner or an admin removes you and invites you again with Safety ticked, or asks Freigent support (see Team, Billing and Settings).
  • Standard level: Freigent shows more or fewer screens depending on your workspace level (Solo, Standard, Fleet, Enterprise). It starts from the fleet size you gave at signup (3 or more trucks starts you on Standard). To change it, open the organization menu at the top of the sidebar, choose Organization Settings, go to the Configuration tab and open Workspace display. Under Per-area detail you can set Safety on its own, separately from the rest of the app. This only changes what is shown; no safety rule or record changes. The level is a display setting, not a billing plan: you do not need to upgrade to see these screens.

Overview: what needs attention

Safety > Overview (page title Safety & Compliance) is the starting point.

  • Needs attention lists open problems: drivers marked prohibited by their last recorded Clearinghouse query, and unresolved critical vehicle defects. Click Review on a row to open it. If a source fails to load, the row says so (for example Clearinghouse check unavailable) instead of showing zero; click Retry all.
  • Scoped metrics shows CDL and medical cards expiring within 30 days, Unresolved Incidents, DVIR Defects and Clearinghouse counts.
  • Work previews shows a few open incidents and critical defects.
  • Quick Actions jumps to Compliance, Clearinghouse, Inspections, Incidents, Hours of Service and Reports & Audit. Hours of Service and Reports & Audit stay locked here until an ELD is connected.
  • ELD Telematics shows whether an ELD account is connected. If not, click Connect ELD (Samsara, Motive, Geotab, Verizon Connect and Omnitracs are listed). See Integrations.
  • Safety Settings (top right) opens the dispatch blocking rules described below. Only managers and above can change them.

Compliance: driver documents and the Clearinghouse

Safety > Compliance has four tabs.

TabWhat it shows
Compliance AlertsExpired, expiring and missing driver documents (CDL, medical card and others), with CDL, Medical Cards, Total Alerts and Critical counts
Document RequestsEvery document you asked a driver for, and its status
Driver Qualification FilesDQF Completeness: how many driver files have every required document (49 CFR 391.51), and which documents each driver is missing. It counts documents on file; it does not decide whether a driver is qualified.
ClearinghouseDrug & Alcohol Clearinghouse Status: Queries Overdue, Due Within 30 Days, Consent Missing or Expiring, Prohibited Drivers

Record pre-employment Clearinghouse queries

A driver can't be dispatched until a full pre-employment Clearinghouse query is on file (49 CFR 382.701(a)). Freigent does not run the query: you run it at clearinghouse.fmcsa.dot.gov, then record the date and result here.

  • Every driver at once: open Safety > Clearinghouse and click Record queries on the banner (or go to Pre-employment queries). Each driver without a query has a row: pick the Query date and the Result (Clear or Prohibited), then click Save. Rows you leave blank are not saved. Each saved query records who entered it.
  • A new driver: fill in Pre-employment Clearinghouse query date and Query result in Add Driver, or add the Pre-employment Query Date and Pre-employment Query Result columns to your driver CSV. Leave them blank if you haven't run it yet; the driver is saved but can't be dispatched until you record it.
  • Get Started shows how many drivers are still blocked and names the first few.

A Prohibited result means the driver can't perform safety-sensitive work, and Freigent opens a critical task for it.

Ask a driver for a document

  1. On Compliance Alerts, click Request Document (top right), or open a row's menu and choose Request Document. On Driver Qualification Files, click Request next to a missing document.
  2. In Request Document from Driver, pick the Driver and the Document.
  3. Choose Urgency: Urgent, pop-up alert or Normal, banner.
  4. Optionally add a Note to driver (optional).
  5. Click Send Request.

If the driver uses the driver app, they get an in-app alert (and a push notification when their phone allows it). If they have no app account, Freigent records the request and tells you to reach them another way. Track it on Document Requests.

File a document you already have

On Driver Qualification Files, click Upload next to the missing document. In Upload Document, choose the Driver, the Document type and the File, add an Expiration date (optional), and save.

You run queries in the FMCSA Clearinghouse portal yourself; Freigent keeps the record and tells you when the next one is due.

  1. Go to Safety > Compliance > Clearinghouse.
  2. On a driver's row, click Record Consent (or Renew Consent) if consent is missing, or Perform Query (Query Now when it is overdue).
  3. For a query, choose the Query Type (Pre-Employment, Annual Query, Reasonable Suspicion, Follow-Up), the Date the query was run and the Query Result, then click Record Query.

A driver whose last recorded result is Prohibited - Violations Found cannot be dispatched. Random testing pools and test results live on the Drug Testing Program page in settings, linked from this tab.

Insurance

Safety > Insurance (page title Policies & Certificates) lists every insurance policy on file with its coverage dates, renewal deadline, limit and certificate status. A banner warns when a policy expires within 30 days, and turns urgent at 14 days.

  • To add or renew a policy, click Add or renew a policy. Policies are one record shared with Accounting > Payables, Insurance tab, where premiums and payments are managed.
  • Certificate & verification records lists coverage verified against FMCSA or taken from a received COI. Use Upload COI, View COI or Replace COI on a record.

For how Freigent requests certificates from your insurance agent for brokers, see Certificates of Insurance (COI).

Training & Coaching

Safety > Training & Coaching (needs the Standard level) has three tabs.

  • Training: training and certification records. Click Add Training to record one.
  • Event Review: safety events reported by your ELD, such as harsh braking, harsh acceleration, harsh turns, collision warnings, lane departure and distracted or drowsy driving (with speed, G-force and location). Open an event and click Mark Preventable, Mark Non-Preventable or Dismiss, and record a Root Cause.
  • Coaching: coaching interventions per driver, with Total Interventions, Pending Acknowledgment, Improvement Rate and Active Escalations. Open a row's menu and use Update status or Complete review.

Inspections

Safety > Inspections keeps each kind of inspection record on its own tab.

TabWhat you do there
Annual & ShopAnnual and periodic inspections. Click Add Inspection to record one.
Driver Reports (DVIR)Pre-trip and post-trip reports, including those drivers submit in the driver app. Click Add DVIR to enter one by hand.
RoadsideYour FMCSA roadside inspection and violation history, pulled by your USDOT number. Click Sync now to pull it; it also refreshes weekly. From an inspection you can Contest an error (DataQs) or Track repair in Defects. If no USDOT number is set, click Set your USDOT number.
DataQsChallenges to inspection, violation or crash records. Click New Challenge, fill in the record and What is wrong?, then Draft with AI or Save challenge. You submit it to FMCSA yourself, then click Mark submitted and, later, Accepted, Rejected or Withdrawn.
DefectsVehicle defects from inspections and reports. Click Report Defect to add one. A row's menu has Mark repaired, Edit Defect, Certify Repair and Delete Record.

Incidents

Safety > Incidents (page title Incidents & Accidents) tracks accidents and other incidents with their status, cost and insurance claims.

  1. Click Add Incident.
  2. Fill in Driver Name, Incident Type, Severity, Status, Date Reported, Location and Description. Estimated Cost ($), Vehicle Number, Reported By and Assigned To are optional.
  3. Save it.

When a driver files an accident report from the driver app, it creates an incident tied to the load and truck. The driver's steps are on Run the Load.

HOS

Safety > HOS (page title Hours of Service) shows hours as your connected ELD last reported them. It is in the sidebar when your workspace display level is Standard or higher (a display setting under Organization Settings > Configuration > Workspace display, not a paid plan). Freigent has HOS sync for Samsara and Motive. Use ELD Connections to manage the connection.

  • Fleet: each driver's Status, Drive Left, Shift Left, Cycle Left, Break In and Last Update. Click Refresh to reload. These are estimates from log data; confirm DOT-authoritative hours with your ELD provider.
  • Violations: HOS violations for the last 7, 30 or 90 days. Use Update status on a row. To find HOS violations, open Safety > HOS and click the Violations tab.
  • DOT Inspection: pick a driver and dates to generate the ELD output file (49 CFR Part 395, Appendix A) an officer asks for at roadside.

Every 15 minutes Freigent checks the latest HOS data and sends a driver with the driver app a push warning when their drive or shift time is running low.

Reports & Audit

Safety > Reports & Audit has five tabs.

TabWhat it gives you
Safety ReportsIncident trends, incident types and driver safety performance for the last 3, 6 or 12 months
Audit ExportA DOT Audit Export of driver files, the DQ file checklist, coaching, incidents, vehicles and your CSA profile. Click Generate Report, then Print Report.
InsuranceA safety report for insurance underwriters. Click Generate Report, then Print Report.
PolicyA link to your written safety program (Open Safety Policy)
CSA ScoresYour CSA BASIC percentiles and FMCSA safety measures, once your USDOT number is set

Safety Settings: what blocks a dispatch

Freigent checks a driver before any load assignment, whether you assign the driver yourself or the AI does. If Freigent will not let you dispatch a driver, one of these checks blocked it.

Why a driver cannot be dispatched: always blocked

These block every time, with no override:

  • an expired CDL or an expired medical card
  • a driver marked prohibited by their last recorded Clearinghouse query
  • a driver with no completed Pre-Employment Clearinghouse query recorded in Freigent (record it on Safety > Compliance > Clearinghouse)
  • a truck out of service
  • a driver in a return-to-duty process or who refused a test, and a carrier whose drug testing program is set up but switched off

A driver with no CDL or medical card date on file is not blocked by the expiry checks, so keep the dates current. Blocks from your own rules (below) can be overridden with Dispatch anyway; these cannot.

Blocked by your own rules

Open Safety Settings (button on Safety > Overview). Under Blocking Thresholds you can turn on:

RuleWhat it does
Pre-trip inspection requiredBlocks a driver without a pre-trip inspection within the Max age you set, in hours
Incident stand-downBlocks a driver after a set number of incidents within a set number of days
Block on expired trainingBlocks a driver whose training has expired
Block on critical vehicle defectBlocks when the truck has more open critical defects than Max open critical (0 means any critical defect blocks)

If you never saved these settings, Freigent uses the defaults shown there: Pre-trip inspection required with a 24 hour Max age, Incident stand-down after 3 incidents in 90 days, and Block on critical vehicle defect with any critical defect blocking. Block on expired training starts off.

Under Driver Requirements you can Require HAZMAT endorsement for HAZMAT loads (on by default) and set Insurance minimums (Liability and Cargo). Click Save under each card.

When one of your own rules blocks a dispatch, a dispatcher can still send it with Dispatch anyway. The AI never overrides a rule on its own.

What Freigent does on its own

These run every day (or on the schedule shown) without you starting them.

WhatWhenWhat happens
Driver credential remindersDailyA task in Workflow for a driver's CDL, medical card or other credential that expires within 30 days or has expired
Driver push remindersDailyThe driver gets a push notification 30, 7 and 1 day before their CDL, driver's license, medical card, HAZMAT, tanker, doubles/triples endorsement or TWIC card expires, and once after it expires. Skipped if they already uploaded a newer one.
Truck credentialsDailyA task when a truck's registration, IFTA or operating permit expires within 30 days or has expired
Insurance policiesDailyA task when a company insurance policy expires within 30 days
TrainingDailyA task when a driver's training expires within 60 days or has expired
MVRWeeklyA task when a driver's newest MVR is more than 12 months old
Roadside inspectionsWeeklyPulls new FMCSA roadside inspections and opens a task for a new out-of-service or violation inspection
CoachingWeekly and dailyOpens coaching tasks for drivers with repeated ELD safety events, and a follow-up when a driver has not acknowledged coaching after 48 hours
HOS warningsEvery 15 minutesPush warning to the driver when drive or shift time is running low

Expiring CDL, medical card and endorsement reminders

You do not set these up. Each day the driver gets a push reminder 30, 7 and 1 day before their CDL, driver's license, medical card, HAZMAT, tanker or doubles/triples endorsement, or TWIC card expires, and once after it expires. A CDL, medical card or other credential that expires within 30 days also opens a task in Workflow for you. Expired and expiring documents are listed on Safety > Compliance > Compliance Alerts.

Freigent opens these tasks and reminds people; it does not complete drug and alcohol tests, accident investigations or FMCSA filings for you. Work the tasks in Workflow, see Working the Queue.

AI Assistant

Ask about Freigent docs

Welcome to AI Assistant

Ask me anything about Freigent documentation, Booking Assistant setup, API integration, or platform features.

Install the Booking Assistant extension

Press Enter to send, Shift+Enter for new line